How to Use Kiarasky Gel Polish

The gel polish manufacturers have come up with another fascinating polish known as Kiarasky. Its colour base has the colour and the base having been mixed into a single bottle. It is very fascinating to have the Kiarasky manicure because it leaves you with one of the most fascinating looks ever. What you need to know is how to apply the gel polish so that you do not have to waste a lot of time when going to the salon.

Kiarasky gel polish

When applying the Kiarasky gel polish, you should note that you need a top coat to get a perfect finish. However, a separate base coat might is optional. It depends on the user. The formulae that used to make this gel is said to be free of solvents. It simply means that its smell is weak and does not thicken nor does it yellow over time. Kiarasky has over 87unique colours with each of the polish colour having a matching gel lacquer that you can always purchase separately. When using Kiarasky gel, there are a few things that you need to know about it in order to get the perfect finish that you desire.

Application

When you are using the top coat and the colour base, it might not work for you. This means that you will be required the base coat in order for it to remain on your nails for a considerable amount of time. The base coat makes the nails not to be too smooth for the polish to stick to them. To some people, ignoring the top layer makes the nails to be too buffed to after only a few days which creates the essence of the base layer. Also, trying different colours after a very short period of time might also lead to chipping off of the new layers applied. It is necessary to stick to the initial layer and allow it to last for the time it is intended after which it starts to chip off naturally. When this happens, you can remove this layer and apply a new one.

When you acquire the Kiarasky gel, applying just 2 coats leaves you with an opaque covering that everyone is proud of. However, applying it must be done from edge to edge to prevent chipping off like the other usual kinds of polishes. You can apply the base coats and two colour coats and a top coat in order to have the best results. With the use of 2 colours, you can have an opportunity to test glitters and cream at the same time. You will realize that the application of cream polishes is very easy due to their consistency. In order to get great coverage of glitters after applying only two coats, the glitter’s coat should be a little bit thicker

If you want to cover larger parts of the nails with only a few strokes, you should use a wider brush. It is the deal with professionals. However, if your nails are a bit narrow, wide brushes can be a little messy to you hence you need to be a little more careful. Excess care is needed especially when you are targeting the curves.

Day 1-14 of application

From day one when you apply the coating correctly, you will realize that there will be no problem with peeling or even chipping of the base coat nail polish. The manicure will last for up to 14 days and within all that time, you will have a perfect look. This polish increases the strength of your nails with or without a base coat. However, over time, the shinning f your nails become dull.

Colours

Kiarasky has very many colours. The unique nature of glitter polishes is very fascinating. If you would have some, you will realize that they are the best that you can ever have. However, there are several colours that you can choose from. With a matte top coat, the glitter colours will give you the kind of texture of nail arts that is really fascinating. It all depends on your taste. Do you need the glitters or the other colours?

The use of kiarasky gel is very fascinating. You do not have to worry about the way you will apply it because it can work for you with or without the base coat. However to provide a more staunch foundation, applying a base coat is recommended. This will then give you at least 14 days of perfect look that leaves your nails stronger and healthier than ever before.